Golden Bee is universal All-in-One FPV drone frame.
Extremely robust, reasonably light and compact. Has low frontal area with minimum drag.
Can be used everywhere, but being a small tank, it suits best for exploring of abandoned sites or freestyling around trees. Have no fear to send it against concrete or metal, it will easily hold any crash.
CrissCrossFPV drone frames with thick Hybrid arms is a result of constant design, testing and development in pursuit of excellence. FPV drones frames with thick Hybrid arms were created under “Durability First” approach, following rest of CrissCrossFPV’s frames properties – low drag, light weight, elaborate design and diversity of options.
Thick Hybrid arms are combining best from regular and vertical arms. They are easy to install and use as regular arms, no need for special mounts and brackets. And in the same time they has minimal frontal area and low drag same as vertical arms. Additionally to all above mentioned Hybrid arms are extremely durable and strong, with ability to withstand high velocity impacts and are almost indestructible within regular use conditions.
Due bottom battery mounting position and vertical alignment of the whole frame, Golden Bee has CG located in the middle, HD camera on top stays in balance with battery on bottom. It has neutral feel and will perform with same response for gliding, looping, diving, cruising, distance tracking and taking of chase footage.
Specifications and Features:
- True X/ Stretched X type frame
- 215/ 225 mm MTM (TrueX/ StretchedX)
- 108 grams weight including hardware
- 23 mm height double stack, plus deck for RX/ TX on the canopy
- 30.5×30.5 and 20×20 stack mounting options
- 5.2 inch props
- for Micro sized cams
- up to 90 deg. rotation angle of camera
- 2x 8 mm thick boomerang arm made from Toray T700 3k Plain Full Woven CF sheet with high gloss finishing
- 2x 2 mm thick top plate made from Toray T700 3k Plan/ UD CF sheet with high gloss finishing
- 2x 2 mm thick camera plate made from Toray T700 3k Plan/ UD CF sheet with high gloss finishing
- 1x 3 mm thick bottom plate made from Toray T700 3k Plan/ UD CF sheet with high gloss finishing
- 4x 10 mm long 7075 T6 Aluminium standoff
- 1x set of steel hardware
BONUS ACCESSORIES INCLUDED:
- 1x 20x220mm Polyester battery straps with non-slip silicone layer
- 1x low ESR Rubycon 35V 1500uF capacitor
- 1x set of anti-damping o-rings with long nylon screws for stack
- 1x set of Carbon steel motor screws
- 4x Diatone PCB wire
Recommended FPV drone building parts:
- 24xx/ 25xx sized motors
- FuriousFPV Racepit 30.5×30.5 Flight Controller
- Aikon AK32 4-in-1 55A 6S 30.5×30.5 4in1 ESC
- RunCam Racer2 Micro camera
- TBS Unify Nano Vtx
- TBS Crossfire Nano Rx