The GAT 160 is a 160mm, 40g true x frame. I designed this hybrid to bridge that gap between the micros and the racing quads. It’s hella lightweight but also durable. The GAT is a sure-fire park killer, when built with the right parts, its a militant savage and will butthurt even the most expensive race builds. It’l take full size or 20×20 components in a very practical layout, making the build simple and straight forward, no kinky shit here. The GAT is constructed to the highest standards using the strongest carbon in a fly matte finish, the standoffs are lightweight aluminium and the bolts are titanium to get the weight down while retaining the strength of heavier steel bolts. No corners cut.
Included in the hardware kit is everything needed to build this up with either separate escs or a 20×20 4in1 esc.
I personally recommend the Brotherhobby 1407 3600kv, Gemfan 4045 2 blade props and a 850mah 4s pack (or 3s with a tri or quadblade), the Emax bullet 20a escs, a Betaflight OSD PDB flight controller or a Piko BLX (bridge some of the escs solder points the the battery connection point to help carry the extra current), a DYS MI200 pigtail VTX or a Eachine VTX03, a Swift mini camera, for the RX, either a LemonRX satellite if you fly DSM or a Frsky XM+ if you fly Frsky.
For this batch, We’re gonna add all the accessories to your frame kit free of charge, that includes:
A set of scuff guards
A set of soft mounts for 20×20 flight controllers
A set of motor soft mounts
A full size camera mount
A swift mini camera mount
A VTX mount
Assembly hardware including titanium bolts and lightweight aluminium standoffs
Please check the recommended parts tab for information on recommended components.
Designed by: Jack “Juicy Jack” Seymour
If you have any questions, please ask on the Rotorious FPV Underground Facebook group so we can share the information.
Thanks for the support!